Build Your Own Arcade Controls Forum
Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: elkameleon on May 09, 2011, 12:01:49 pm
-
I was wondering if anyone has any experience using one of these boards with MAME... They are tiny as hell, but not super powerful at 1.5GHz, but would it be good enough for the classics like mario bros, donkey kong and pac man?
http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?id=450 (http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?id=450)
-
I have an older VIA EPIA M1000 in a bar-top machine, which I think is 1ghz; works well enough running the "classics" using MicroXP and an older version of Mame - can't quite remember what version I am running; maybe .87 or so? The main issue for me is the audio. I had to set Mame to run audio at 22khz to avoid serious audio stuttering. Since yours is a newer motherboard, the on-board audio might be improved, and the faster processor should help things as well. Don't expect to run any of the newer, more complicated games however. But should work fine for a majority of the classic arcade games with an older version of Mame.
-
I have an older VIA EPIA M1000 in a bar-top machine, which I think is 1ghz; works well enough running the "classics" using MicroXP and an older version of Mame - can't quite remember what version I am running; maybe .87 or so? The main issue for me is the audio. I had to set Mame to run audio at 22khz to avoid serious audio stuttering. Since yours is a newer motherboard, the on-board audio might be improved, and the faster processor should help things as well. Don't expect to run any of the newer, more complicated games however. But should work fine for a majority of the classic arcade games with an older version of Mame.
I have the same Nehemiah 1000 runing TinyXP and it runs the older games pretty well. some have sound issues, some dont. newer 1.5 should be fine