Build Your Own Arcade Controls Forum

Main => Buy/Sell/Trade - non-retail => Topic started by: Fusion916 on April 12, 2011, 01:32:44 pm

Title: FS: SCART to Component Video Converter **VERSION 2**
Post by: Fusion916 on April 12, 2011, 01:32:44 pm
SCART to Component Video Converter
**Version 2**

(http://img215.imageshack.us/img215/9861/scarttoyuv1small.png)

(http://img35.imageshack.us/img35/2891/scarttoyuv2smaller.png) (http://img845.imageshack.us/img845/4941/scarttoyuv4smaller.png)


Are you interested in high quality retro gaming? Can't get enough of your SNES, Genesis or other retro console but don't like your video output options? Most retro consoles output high quality RGB signals via the SCART cable, but there are almost no TVs in the US that accept this connector.

The solution?

Retrotek's SCART/VGA to Component Video converter. This board accepts any RGB signal via SCART or VGA connector, then converts them to YUV (component video) unscaled and unproccessed for the purest conversion component video possible. This will work for any console that outputs RGB video, and even works with computers. Yes this board will even work for connecting for computer to an HDTV and supports resolutions up to 720p.

Super Nintento
(http://img853.imageshack.us/img853/3905/super.jpg)

Sega Genesis
(http://img215.imageshack.us/img215/7749/gennz.jpg)

Playstation 1
(http://img846.imageshack.us/img846/5881/ps1.jpg)

Arcade/JAMMA (CPS2)
(http://img695.imageshack.us/img695/8364/arcadeh.jpg)

720p from computer
(http://img845.imageshack.us/img845/3742/comp.jpg)


Comes with board, power supply, and detailed manual

Price: $55 shipped US, $62 shipped worldwide. Paypal gift or +4%

No ebay listing this time, but you can see ebay feedback from this board here:

http://feedback.ebay.com/ws/eBayISAPI.dll?ViewFeedback2&userid=fusionz916&&_trksid=p4340.l2560&iid=190509882797&sspagename=VIP:feedback&ftab=FeedbackAsSeller (http://feedback.ebay.com/ws/eBayISAPI.dll?ViewFeedback2&userid=fusionz916&&_trksid=p4340.l2560&iid=190509882797&sspagename=VIP:feedback&ftab=FeedbackAsSeller)
Title: Re: FS: SCART to Component Video Converter **VERSION 2**
Post by: Fusion916 on April 12, 2011, 10:51:53 pm
Sold out quick, sorry guys.

Will have more in a few weeks!
Title: Re: FS: SCART to Component Video Converter **VERSION 2**
Post by: DataWest on April 13, 2011, 01:06:43 am
Question.....

So with this my computers VGA signal would be converted to component unscaled so that I could run to an old CRT tv??

No additional software or anything?
Title: Re: FS: SCART to Component Video Converter **VERSION 2**
Post by: Fusion916 on April 13, 2011, 02:27:59 am
Question.....

So with this my computers VGA signal would be converted to component unscaled so that I could run to an old CRT tv??

No additional software or anything?

Correct, but your old crt would need to be able to sync the same resolution as your computer. For example, if your computer is running 640x480, your crt would need to be able to display 640x480.
Title: Re: FS: SCART to Component Video Converter **VERSION 2**
Post by: Fusion916 on November 09, 2011, 11:57:10 am
Back in stock and ready to ship tomorrow. Taking pre-orders, first come first serve.