Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: litwack on April 03, 2011, 06:07:22 pm

Title: Has anyone made a MVS-based Neo Geo bartop?
Post by: litwack on April 03, 2011, 06:07:22 pm

This is my first post, so please be gentle. I've Googled around and seen a few Neo Geo themed bartops with computers inside, but has anyone built one with a 1-slot MVS inside? I'm fuzzy on all the wiring and stuff that would have to be done, what power supply, etc. I realized I could probably stick a prebuilt "consolized" MVS unit inside a Northcoast bartop unit but that almost seems like cheating.

Title: Re: Has anyone made a MVS-based Neo Geo bartop?
Post by: BobA on April 04, 2011, 12:36:35 am

This is the smallest MVS 1 slot that I have seen.  You will probably have to use Google to translate from Spanish to English for the details.  Pics are good without translation.

MVS Bartop Spanish (http://www.elotrolado.net/hilo_pocket-neo-arcade-2-0-proyecto-terminado_1251492)

Title: Re: Has anyone made a MVS-based Neo Geo bartop?
Post by: litwack on April 04, 2011, 11:27:52 am

BobA, that is really helpful, thank you. That's a really small unit!

Title: Re: Has anyone made a MVS-based Neo Geo bartop?
Post by: BobA on April 06, 2011, 08:16:27 am

Not a bartop but a mini.  Might give you some construction ideas.  If the bottom was cut off it would be a bartop.

Mini MVS Thread (http://forum.arcadecontrols.com/index.php?topic=81845.0)

Here is a bartop but it uses a PC not an MVS board.

PC Based (http://amoddinghomecompanion.blogspot.com/2010/11/my-fall-project-neo-geo-bartop-arcade.html)