Build Your Own Arcade Controls Forum
Main => Audio/Jukebox/MP3 Forum => Topic started by: martyn on April 01, 2011, 02:08:42 pm
-
hi all am new to this sort of thing so please be kind.
can anyone give me a pointer to someone in the derby area that might know why my rowe 88 is humming like a banshee and while on are there meant to be speakers in the bottom section as mine seems to have an audio lead to nothing and only the top speakers running and they seem to be through a loose board in the bottom.also no volume control anyone got a manual !!!
any thoughts or people with same , let me know
-
The manuals can be purchased from www.victoryglass.com (http://www.victoryglass.com) or www.alwaysjukin.com (http://www.alwaysjukin.com)
-
Hi Martyn,
Ken is correct you need to buy a manual.
The volume control is 10k log.
There should be two bass speakers in the bottom of the cabinet the board you are talking about is the crossover assembly.
You should be able to get good used speakers of the correct type at www.jukeboxparts.com (http://www.jukeboxparts.com)
Regards
Alan Hood
ami-man
UK
-
Hi Martin,
I found the following website (http://www.thearcadeboneyard.com/RoweJukeboxManuals.html (http://www.thearcadeboneyard.com/RoweJukeboxManuals.html)) helpful for manuals but I looked for your model and it is not listed but maybe the other models might point you in the right direction. Just a recommendation!
v/r
RnR
-
The 'manuals' at that website are scanned in very low resolution and to me are useless.
It's best to purchase the manuals from legitimate sources such as Victory Glass and Always Jukin. You'll get a crystal clear genuine offset printed (not scanned) manual.