Build Your Own Arcade Controls Forum

Arcade Collecting => Pinball => Topic started by: RayB on March 16, 2011, 12:17:44 pm

Title: What kind of screw should hold down backglass rail? (WMS sys 11)
Post by: RayB on March 16, 2011, 12:17:44 pm

My backglass does not line up vertically with my score displays . The metail rail at the bottom is held in with regular round-head philips screws. I'm thinking these are keeping the backglass from sitting lower in the rail channel.

Any other methods to adjust height of backglass or the "door" behind it?

Title: Re: What kind of screw should hold down backglass rail? (WMS sys 11)
Post by: RayB on March 16, 2011, 09:18:20 pm

Yup, it is. And the metal tab that is attached to the lower right inside the backbox was bent downward, so I bent that back up. The lighting "door" needs to be lifted a bit now to secure into place, but now the scores are pretty much lining up correctly. Mostly.

*Can a mod merge this into my Road Kings thread?