Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: 51mmz0rz on March 01, 2011, 09:16:35 am

Title: LED Harness Placement for Ultralux Buttons
Post by: 51mmz0rz on March 01, 2011, 09:16:35 am: I have some Ultralux buttons for player/coin/admin, with the tricolor LED and wiring harness. I am wondering how you guys orient the wires so the plunger doesn't hit them on the way down. This is the closest I've come, yet the plunger will still graze the yellow wire, and the feeling is noticeable:

(https://lh5.googleusercontent.com/__cmZSYYV1Do/TWz94KwEl9I/AAAAAAAAAZ0/Fautnucg0L8/s640/IMG_1323.JPG)

Also in this configuration, it is pretty difficult to get the button over the LED and switch holder since the wires are in the way (they mount with the plunger initially to the right of where it is in the photo, coming down right on top of the wires; you then turn clockwise to lock into place).

So any tips?
Title: Re: LED Harness Placement for Ultralux Buttons
Post by: BobA on March 01, 2011, 09:42:57 am: See the last entries of this thread and he shows how he altered his buttons.

Ultralux Tips and Construction thread (http://forum.arcadecontrols.com/index.php?topic=103063.0)
Title: Re: LED Harness Placement for Ultralux Buttons
Post by: Nephasth on March 01, 2011, 09:43:59 am: Quote from: BobA on March 01, 2011, 09:42:57 am
See the last entries of this thread and he shows how he altered his buttons.

Ultralux Tips and Construction thread (http://forum.arcadecontrols.com/index.php?topic=103063.0)

Post #84
Title: Re: LED Harness Placement for Ultralux Buttons
Post by: 51mmz0rz on March 01, 2011, 11:15:29 am: Great, thanks for the help guys...I searched but somehow didn't see that. It looks like a nice solution.