Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: TheButcherJB on February 16, 2011, 09:44:41 pm
-
Here are some pics on what I'm trying to find. Please help!
I think they are 1-1/8 but I'm not sure..
(http://i53.tinypic.com/103ere1.jpg)
(http://i55.tinypic.com/2ym87qa.jpg)
(http://i52.tinypic.com/7303lu.jpg)
-
chips4sale on KLOV has them pretty cheap. You will need to reuse the latch part.
-
You can try twisted quarter also
http://www.twistedquarter.com/index.php?main_page=product_info&cPath=3&products_id=326 (http://www.twistedquarter.com/index.php?main_page=product_info&cPath=3&products_id=326)(http://www.twistedquarter.com/images/302224A05_color.jpg)
You will have to keep the end with the hook and transfer it over to the new lock but it should work.
-
Isn't that just a standard lock of that type? When I bought my pinball machine I replaced a lock like that and all i did was take it to a local locksmith and say "I need another of these" and two minutes later I walked out with one.
-
Isn't that just a standard lock of that type?
It is. Happ has them, too.
-
Sorry to revive an older thread like this but any suggestions on how to unlock one of these? I just got an old Soul Caliber cabinet but it did not come with a key for the lock (almost the same as pictured in this thread). It's the coin door lock so I can't just get to it from the back of the cabinet without cutting into the coin box. I can see old tokens in the bottom of the coin bucket too, just mocking me! Once I've got it unlocked then I'll just remove and replace with one that I actually have a key for.
*edit* whoops, mines actually a lock like this one: http://intersol.us/p7hg_img_1/fullsize/barrelLock1_fs.jpg. (http://intersol.us/p7hg_img_1/fullsize/barrelLock1_fs.jpg.) Still, any help is appreciated.
-
Those are tough to pick - just get a carbide bit and drill it out.
-
You might just be able to shove a long screw driver in and break the lock with a hard twist. Failing that, fire up a drill like smalltownguy suggests.