Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: jolietcr14 on January 25, 2011, 10:19:50 pm

Title: my new problem...
Post by: jolietcr14 on January 25, 2011, 10:19:50 pm

just swapped mk3 board for sf hyper fighting...cant seem to access my menu to put on free play...manual says there is a switch in the  coin door but after drillin out locks ..opened the door and see no switch....im sure its an easy explanation but this is my first board swap!!!...

Title: Re: my new problem...
Post by: Nephasth on January 25, 2011, 10:39:59 pm

Just wire up a switch to the pins on the board for the switch that is supposed to be behind the coin door.

Title: Re: my new problem...
Post by: BobA on January 25, 2011, 11:18:29 pm

You might already have a test switch somewhere in you cab. Check the jamma connector to see if one is already wired.

Title: Re: my new problem...
Post by: jolietcr14 on January 26, 2011, 11:03:26 am

FIGURED IT OUT...YOU SET THE DIPSWITCHES...THANKS GUYS