Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: jolietcr14 on January 24, 2011, 11:10:22 pm

Title: mortal kombat 3 to street fighter 2 hyper
Post by: jolietcr14 on January 24, 2011, 11:10:22 pm

just bought a street fighter 2 hyper jamma ..what do i need to swap from my mk3 board?.....looks like the pinout is same but controle is different setup.....

Title: Re: mortal kombat 3 to street fighter 2 hyper
Post by: Malenko on January 25, 2011, 09:53:02 am

you need a kick harness. HP,BL, and HK map to the punch buttons in street fighter through the jamma harness

Title: Re: mortal kombat 3 to street fighter 2 hyper
Post by: jolietcr14 on January 25, 2011, 04:11:30 pm

thanks...im a newbie....just ordered one

Title: Re: mortal kombat 3 to street fighter 2 hyper
Post by: Malenko on January 25, 2011, 05:25:48 pm

you gonna alter the control panel for the traditional SF2 set up?

Title: Re: mortal kombat 3 to street fighter 2 hyper
Post by: jolietcr14 on January 25, 2011, 10:16:39 pm

dont think so ...i wanna be able to switch back to mk3 if i get bored w/street fighter

Title: Re: mortal kombat 3 to street fighter 2 hyper
Post by: Malenko on January 26, 2011, 11:40:37 am

dedicated MK cab? just cut a new top piece of wood

Title: Re: mortal kombat 3 to street fighter 2 hyper
Post by: jolietcr14 on January 26, 2011, 12:32:57 pm

GOOD IDEA THANKS FOR THE INFO AGAIN