Build Your Own Arcade Controls Forum

Main => Buy/Sell/Trade - non-retail => Topic started by: Neverending Project on January 21, 2011, 12:18:46 am

Title: FS: One AimTrak lightgun module installed in Act Labs gun shell [US / OR]
Post by: Neverending Project on January 21, 2011, 12:18:46 am

For sale is one AimTrak light gun module installed in one red Act Labs gun shells. The AimTrak firmware has been upgraded to the latest version (v1.6), and is working great.
*EDIT* The picture below shows two guns, but only one is for sale. The other has already been sold. *EDIT*

Note: This sale does not come with an LED bar.

There are two buttons on the Act Labs guns, but only the trigger is working. The button on the back of the gun is wired to the AimTrak pcb, but there is a mechanical problem where the back button click does not register. There is a spring that is supposed to activate the micro snap switch when you press the button, but somehow after opening and closing the gun housing, the spring no longer activates the switch. The trigger works great, though. The slide switch is present on the Act Labs pcb in the gun housing if you wanted to hack into it for extra functionality. It has a 3-meter USB cable.

Everything was bought new, and has seen very little use. New, it would cost:
AimTrak w/out LED pcb: $36 + shipping
Act Labs red gun: $20 + shipping

But you can have it for the low price of: $45 shipped to the US.

Edit: Price drop.
Second Edit: One gun sold, only one remaining.

Title: Re: FS: Two AimTrak lightgun modules installed in Act Labs gun shells [US / OR]
Post by: Neverending Project on January 25, 2011, 04:57:30 pm

Price dropped to $80.

Title: Re: FS: Two AimTrak lightgun modules installed in Act Labs gun shells [US / OR]
Post by: codenamed on January 26, 2011, 09:44:26 am

Would you go 35 shipped for one?

Title: Re: FS: Two AimTrak lightgun modules installed in Act Labs gun shells [US / OR]
Post by: Neverending Project on January 26, 2011, 11:38:02 am

They are being sold as a pair. I do not want to sell them individually.

Title: Re: FS: Two AimTrak lightgun modules installed in Act Labs gun shells [US / OR]
Post by: codenamed on January 26, 2011, 12:24:33 pm

Well if you decide to split them I would go 40 for a single gun as I already have a gun. Good luck with your sale.

Title: Re: FS: Two AimTrak lightgun modules installed in Act Labs gun shells [US / OR]
Post by: Neverending Project on February 02, 2011, 01:14:28 pm

Bump.

Title: Re: FS: Two AimTrak lightgun modules installed in Act Labs gun shells [US / OR]
Post by: codenamed on February 02, 2011, 11:32:09 pm

How bout 45 shipped for one ;-)

Title: Re: FS: Two AimTrak lightgun modules installed in Act Labs gun shells [US / OR]
Post by: Neverending Project on February 03, 2011, 12:51:12 pm

Alright, you got yourself a deal. PM sent.  :cheers:

Title: Re: FS: One AimTrak lightgun module installed in Act Labs gun shell [US / OR]
Post by: Neverending Project on February 04, 2011, 12:46:50 pm

Original post updated to show only one gun remaining for sale for $45 shipped.

Title: Re: FS: One AimTrak lightgun module installed in Act Labs gun shell [US / OR]
Post by: codenamed on February 04, 2011, 12:48:12 pm

Cant believe you have shipped already now that's quality. :applaud:

Title: Re: FS: One AimTrak lightgun module installed in Act Labs gun shell [US / OR]
Post by: Neverending Project on February 04, 2011, 12:53:39 pm

Prompt payment gets prompt shipping.  :cheers:

Title: Re: FS: One AimTrak lightgun module installed in Act Labs gun shell [US / OR]
Post by: codenamed on February 07, 2011, 08:30:33 pm

Just got the gun cant wait to give it a try. Bump for a good seller

Title: Re: FS: One AimTrak lightgun module installed in Act Labs gun shell [US / OR]
Post by: Neverending Project on February 14, 2011, 12:59:04 pm

Valentine's Day Bump!