Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: MagicManPA on January 12, 2011, 12:49:12 pm

Title: Paradise USB controller install
Post by: MagicManPA on January 12, 2011, 12:49:12 pm
done
Title: Re: Paradise USB controller install
Post by: eds1275 on January 12, 2011, 12:53:26 pm
You daisy chain the grounds together!
Title: Re: Paradise USB controller install
Post by: MagicManPA on January 12, 2011, 12:54:43 pm
You daisy chain the grounds together!
Maybe I wasn't clear, I have the grounds covered. It's the other 2 prongs that I am unsure of...
Title: Re: Paradise USB controller install
Post by: Hoopz on January 12, 2011, 12:55:29 pm
If you have "standard" micro switches, you wire the ground and the NO (normally open) contacts.  Here is a link to this website's menu and you can select the WIRING button on the left frame to get detailed pictures and more info:

http://arcadecontrols.com/arcade.htm (http://arcadecontrols.com/arcade.htm)

Not sure why the individual page doesn't like though.  Regardless, it's easy to pull up and read.

EDIT:  Fixed an error.  I screwed up....  :-[
Title: Re: Paradise USB controller install
Post by: BobA on January 12, 2011, 01:05:16 pm
I think that is NO (normally open) so it closes when you press the switch and passes the ground to the interface. ;)
Title: Re: Paradise USB controller install
Post by: Hoopz on January 12, 2011, 01:08:59 pm
Fixt!  I was trying to work and post.  Time to stop working...
Title: Re: Paradise USB controller install
Post by: 8lords on January 19, 2011, 09:13:52 am
You daisy chain the grounds together!
Maybe I wasn't clear, I have the grounds covered. It's the other 2 prongs that I am unsure of...

Yep, you only use the ground and the NO.
Title: Re: Paradise USB controller install
Post by: MagicManPA on January 19, 2011, 09:26:34 am
Already up & running, but thanks guys.