Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: myran on December 07, 2010, 04:54:44 pm

Title: problem with my nanao 29" in my egret 2
Post by: myran on December 07, 2010, 04:54:44 pm

hi i´m having a problem with my egret 2 monitor, it had a problem where in "compressed" the picture towards the middle, so i took the chassie board out and changed all the caps, put the chassie back in but now when i plug the cab in, all i get is 3 thin  "lines" red, blue and green, in the middle of the screen, from top to bottom, any one got any ideas what this could be?

/fredrik

Title: Re: problem with my nanao 29" in my egret 2
Post by: grantspain on December 07, 2010, 05:44:08 pm

sounds like you plugged soemthing in wrong or missed a plug
e2 have ms9-29t monitors,you have two yoke connectors

post a photo of what you have connected

btw don't forget the remote board connection

Title: Re: problem with my nanao 29" in my egret 2
Post by: myran on December 08, 2010, 09:00:02 am

Thanks, that was it, one of the cables to the yoke had somehow got loose from the chassie board, i´ll try the monitor out and see if the cap-kit helpt my problem with the compressed picture.

Title: Re: problem with my nanao 29" in my egret 2
Post by: grantspain on December 08, 2010, 03:49:55 pm

post a photo of the screen,use a grid test pattern
it could be just an adjustment