Build Your Own Arcade Controls Forum
Main => Monitor/Video Forum => Topic started by: g.robert on November 30, 2010, 01:23:39 pm
-
Can anyone tell me if I can adjust these lines out of my 25" Tecken Tag Tourn arcade and if so how?? ???(http://)
-
Have you adjusted the screen pot on the flyback? Looks like retrace lines.
-
Have you adjusted the screen pot on the flyback? Looks like retrace lines.
No I worked with the focus on the flyback and the four pots on the remote adjust board before I completed the game and placed it in my arcade awhile back. Now that the machine is in place I had hoped to get advice before lugging it out into the open to get to those flyback trim pots. If you confirm this is a typical condition and not uncommon to fix with that adjustment I'll pull it out and give it a try. Thanks for the advice!
-
Definitely looks like retrace lines. First thing to do is try turning down the SCREEN pot on your monitor chassis.
-
They're definitely retrace lines. Are you sure there's no way to adjust the screen without pulling the whole thing?
-
I may have miss-worded this; I meant pull the machine out of it's space, remove back cover...Sorry showing my lazy side. I do not need to remove the monitor. I can reach the remote adjust board from the front without moving the machine but I think the "screen" adjust is on the flyback and I'll need access to the back of the machine to do that.
-
Sceen did it! Thanks for the help guys... :applaud: