Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: stickdragon on November 25, 2010, 05:52:28 pm

Title: hantarex polo (new flyback bad colors)
Post by: stickdragon on November 25, 2010, 05:52:28 pm

I have a polo 25 monitor in my tekken 3 cab and the flyback went out. started sparking.

I replaced the flyback and this seems to have started another whole issue with the colors.
The images are washed out, bland and black seems to be very blueish. i marked all the starting points of the dials and tried to adjust some slightly, but everything started get a whole lot worse and just put them back to where i started.

I read a few things that suggested adjusting RV405, 406, 3, 4, 5, but i couldn't find them.

any help would be great, but please if you can give me the general location of any of the dials that need to be adjusted. eyesight is not the greatest and the print on the chassis is very small.

Title: Re: hantarex polo (new flyback bad colors)
Post by: Ken Layton on November 26, 2010, 12:49:39 am

Probably needs to be manually degaussed.

Title: Re: hantarex polo (new flyback bad colors)
Post by: grantspain on November 27, 2010, 04:49:07 am

the colour gains and cut offs are on the neck card

Title: Re: hantarex polo (new flyback bad colors)
Post by: rmackie6661 on June 07, 2011, 10:29:34 pm

DID you ever figure this out?  I have the same damn thing going on right now.  new fly ,caps and the colors are all bleeding together and the contrast is off.