Build Your Own Arcade Controls Forum

Arcade Collecting => Pinball => Topic started by: MameMaster! on October 27, 2010, 11:21:56 am

Title: Molex Kit?
Post by: MameMaster! on October 27, 2010, 11:21:56 am

I need to replaced a couple of singed molex connectors on my Cyclone pinball. Any suggestions on vendors with kits that have all of the basics?

I checked out pinballlife and may buy a set from him, but it would be missing all of the tools I need.

I also printed out the info on molex over at Marvin.

Any suggestions?

Thanks! :cheers:

Title: Re: Molex Kit?
Post by: djfunkshun on October 27, 2010, 11:53:51 am

Maybe you can check out mikesarcade.com

Title: Re: Molex Kit?
Post by: Dr Zero on October 27, 2010, 12:00:03 pm

What molex connectors are you needing?

Here is a cheap kit with tools that some pc guys have used with good results
http://www.directron.com/cafusomokitwgr.html (http://www.directron.com/cafusomokitwgr.html)

tools
http://www.directron.com/caspsumtk.html?gsear=1 (http://www.directron.com/caspsumtk.html?gsear=1)

Title: Re: Molex Kit?
Post by: MameMaster! on October 27, 2010, 01:02:13 pm

Thanks for the info.

I spoke with Terry at pinballlife.com-- he's got a complete set for $55 that should keep me going for quite a while.

Much appreciated  :cheers: