Build Your Own Arcade Controls Forum

Front End Support => Maximus Arcade => Topic started by: joelmeddings on October 12, 2010, 07:51:05 am

Title: PS1 emulator issue
Post by: joelmeddings on October 12, 2010, 07:51:05 am

Hi Guys,  I've just got a nice mortal kombat cab up and running using maximus arcade as my frontend.  I have MAME, gameboy and Sega Master System all running fine.  I have a PS1 emulator that runs fine when launched outside of MA.  When i launch PS1 using MA, it launches and plays fine for about 30 seconds.  After this time it closes and goes back to my frontend.  I suspect it is a setting wrong with MA.  Anyone encountered this before or have any ideas about what may be playing up.

Cheers.:D

Title: Re: PS1 emulator issue
Post by: DeLuSioNal29 on October 12, 2010, 06:17:41 pm

I use epsxe 1.7 and it seems to work fine with MA.

Which one are you using?

D

Title: Re: PS1 emulator issue
Post by: joelmeddings on October 15, 2010, 06:10:52 am

I'm Currenty using Psx v 1.13.  And i'm using Maximus Arcade 2.10.

 :)

Title: Re: PS1 emulator issue
Post by: joelmeddings on October 15, 2010, 07:55:23 am

Ok,  I've downloaded epsxe 1.7.  it works fine outside if MA.  But when i try to launch in MA it just loads up the epsxe window and doesn't actually load games or go full screen.  All u get is the little blue epsxe screen up the top right of the screen.  Anyone experienced this issue?

 ;)

Title: Re: PS1 emulator issue
Post by: joelmeddings on October 15, 2010, 07:44:13 pm

I've tried the -f i had for psx, i tried it blank,  i tried -nogui -loadbin %file which i read on this forum.  All result in the same outcome.  Is there one command line that it should be or are there many that will work?

Title: Re: PS1 emulator issue
Post by: DeLuSioNal29 on October 17, 2010, 01:44:22 am

My Command Line has:

-nogui -loadbin %file

Window State:  normal

Path to media:  short

I'm running Windows XP 32-bit

Title: Re: PS1 emulator issue
Post by: joelmeddings on October 18, 2010, 04:58:10 am

Thanks Delusional,  it now launches games in MA.  BUT the games crash after about a minute.   :banghead: So now it's the same problem i was having with psx.  This points to a setting in MA itself and not the emulators!  Any ideas as to why this is so?

Title: Re: PS1 emulator issue
Post by: DeLuSioNal29 on October 19, 2010, 11:45:51 am

So it doesn't crash outside of MA?

What game are you trying to run and what are your settings?  I'll double-check mine too.  epsxe is kind of tricky and I finally got it to work properly after some trial and error tweaking.

~ D

Title: Re: PS1 emulator issue
Post by: joelmeddings on October 20, 2010, 06:35:30 am

Yes all games work outside of MA and none work in MA.  Games are crash bandicoots, spyro's and tony hawks 1.  The settings are
command              -nogui -loadbin %file
window                normal
path to                  short
loading screen display            0
show loading screen when launch     ticked
These are the settings i'm runing.
What is LED Blinky used for?