Build Your Own Arcade Controls Forum

Main => Buy/Sell/Trade - non-retail => Topic started by: newkillergenius on September 18, 2010, 04:53:22 pm

Title: WTB/T WORKING Atari Centipede ARII board OK/TUL
Post by: newkillergenius on September 18, 2010, 04:53:22 pm

If anyone has a known working one I'd like to speak to YOU!   ;D

I have a non-working one too if you're the type that knows how to fix these.  Thanks in advance-

Title: Re: WTB/T WORKING Atari Centipede ARII board OK/TUL
Post by: newkillergenius on October 07, 2010, 04:16:31 pm

bump  ;D

Title: Re: WTB/T WORKING Atari Centipede ARII board OK/TUL
Post by: Q*Bert_OP on October 07, 2010, 05:31:00 pm

What's wrong with the one you have?

-The chip sockets are the biggest cause of failure/flakyness
-Don't mix mask roms with EPROMS...the software revisions are incompatible
-RAM are often at fault...go into test mode and report back with your error code

Title: Re: WTB/T WORKING Atari Centipede ARII board OK/TUL
Post by: RayB on October 07, 2010, 11:39:17 pm

Just buy a rebuild kit and it will work once again:

http://therealbobroberts.net/parts.html#atari (http://therealbobroberts.net/parts.html#atari)

(just remember that after you've rebuilt it, you'll want to measure the voltage and adjust it accordingly)

Title: Re: WTB/T WORKING Atari Centipede ARII board OK/TUL
Post by: newkillergenius on February 03, 2011, 11:52:54 am

Nope, too lazy.  I bought one, it works, the end!


 :cheers: