Build Your Own Arcade Controls Forum
Main => Buy/Sell/Trade - non-retail => Topic started by: Franco B on September 04, 2010, 06:33:58 pm
-
I thought it was about time I had a clear out of some things that I'm not going to be using. I really don't want to have to sell some of this stuff but I'm no longer going to use it so it may as well go to someone who will use it.
All prices are plus shipping.
GGG LED Wiz's - SOLD
(http://img.photobucket.com/albums/v325/Francoberasi/allfour.jpg)
(http://img.photobucket.com/albums/v325/Francoberasi/LWHousing2.jpg)
(http://img.photobucket.com/albums/v325/Francoberasi/LWHousing3.jpg)
Three LED Wiz's (IDs 1, 2 and 3) mounted in a Hammond Blue Ice Project box's. The terminals are wired to 15 pin D-subs. All LED Wiz's are new and unused apart from #1 which had approx 1 hours total run time. There are also 4 blue LEDs inside each case (not wired to the terminals, there are separate leads to power them) All come with a USB cable.
Price £30/$45 each. - ALL SOLD-
For reference you can use a ID#3 device on it own.
PAC Drive:
(http://img.photobucket.com/albums/v325/Francoberasi/BYOAC%20sales/pacdrive.jpg)
New and unused. Complete with USB cable
Price £15/$22.50
Blue Sanwa balltops:
(http://img.photobucket.com/albums/v325/Francoberasi/BYOAC%20sales/sanwaballtops.jpg)
Price: £2/$3
Groovy Game Gear translucent blue balltops:
(http://img.photobucket.com/albums/v325/Francoberasi/BYOAC%20sales/GGGbaltops.jpg)
I bought these balls specially from Randy for one of my projects. They are currently solid with no screwthread/insert. I can sell them as they are or I can machine the balltops and fit a threaded insert to match your joysticks.
Price: £2/$3 each as they are, £5/$7.50 each with the inserts.
Two $old, two left
Two 120mm Blue/Red Scrolling LED fans:
(http://img.photobucket.com/albums/v325/Francoberasi/BYOAC%20sales/fans.jpg)
I had these imported from the US, I don't think you can get them in the UK.
You can change the scrolling text and fade type/speed etc. I only seem to have one box for some reason but there are two fans, two USB programmer dongles, two dongle>fan cables, one install disc and one manual.
They are also as new. I only have used them to test them
V2141 04 09 10 (http://www.youtube.com/watch?v=vuY5sA4x2uU#)
The flicker is due to the camera. They are actually very clear and vibrant.
Price £10/$15 each.
Bulgin LED buttons:
I have eight Bulgin Illuminated Vandal Resistant normally open momentary switches for sale. They are stainless steel with a blue LED ring. The LEDs require 3.5v but I should be able to include the required resistors for a 5v or 12v source. Ideal for cabinet start button.
These are genuine Bulgin buttons, not cheap knock offs.
Price £7.50/$11 each - SIX SOLD, TWO REMAINING
(http://img.photobucket.com/albums/v325/Francoberasi/bulgin1.jpg)
(http://img.photobucket.com/albums/v325/Francoberasi/bulgin21r.jpg)
(http://img.photobucket.com/albums/v325/Francoberasi/bulginbuttonsr.jpg)
Stainless Steel button bezels:
(http://img.photobucket.com/albums/v325/Francoberasi/buttonbezelsfinished.jpg)
CNC milled from 1mm stainless steel and polished to a brushed finish.
Price: 6 button £10/$15 each, 3 button £5/$7.50 each.
I also have these four double button panels that I was going to have on the front of the cocktail panels with vinyl player graphics on.
(http://img.photobucket.com/albums/v325/Francoberasi/Playerpanels.jpg)
Price: £7.50/$11 each
Mounted pics for reference:
(http://img.photobucket.com/albums/v325/Francoberasi/CPSTOP.jpg)
(http://img.photobucket.com/albums/v325/Francoberasi/SPINNER1.jpg)
Cocktail feet:
(http://img.photobucket.com/albums/v325/Francoberasi/legshome.jpg)
I may sell these feet I made for my cocktail. They are CNC milled from solid stainless steel and then polished to a brushed finish.
I'll be looking for offers over £60/$90 for these.
SSF2T Poster: SOLD
(http://farm5.static.flickr.com/4080/4752389412_579ee2ce1c_z.jpg)
Awesome condition. I'll post the dimensions later. IIRC its B1 (707 x 1000mm)
£20/$30
I'll add more parts as I find them.
Sold items:
GGG Turbo Twist 2 spinner + extras SOLD
Clear buttons: SOLD
IPAC 4: SOLD
10cm 12v Blue Cold Cathodes: SOLD
30cm 12 Blue Cold Cathodes: SOLD
Sanyo 115w amplifier: SOLD
22 GGG Microleaf Microswitches SOLD
GGG LED holders: SOLD
-
PM Sent on the TT2 kit
-
TT2 still availiable.
I can split the spinner if interested. £45 for the spinner/original top/interface etc, £15 for the Space Invader spinner top, £10 for the wheel.
Amp - sold
Cathodes - pending
Two GGG ball tops - pending - two remaining.
-
ah man i just spent all my cash
-
Bump for some really awesome kit ...
-
Cheers Cheffo :cheers:
Update:
Cathodes sold. Cathodes and amp shipped.
----------------------------
Items currently on hold:
TT2 Spinner
20 Buttons
20 LED Holders
One LED Wiz
----------------------------
SSFT2 poster added
LED Scrolling fan video fixed
-
Update:
A few more things sold (Cheers Rob!).
22 GGG Microleafs added.
-
LED-Wiz #2 sold, just #3 remaining (which can be used on its own)
Microleafs sold
:cheers:
-
Remaining GGG LED holders: SOLD
-
It's about time for a :bump
-
Any offers/trades?
-
Did you make those button bezels? They are awesome! I would love them, but I have a 7 button layout.
-
Thanks. Yeah they were CNC milled. It would have been 1000x easier to get them laser or water cut though. Never again! :dizzy: :)
-
:bump
No one in the UK need a new LED Wiz? I can take it out of the enclosure if required.
-
I have eight Bulgin Illuminated Vandal Resistant normally open momentary switches for sale. They are stainless steel with a blue LED ring. The LEDs require 3.5v but I should be able to include the required resistors for a 5v or 12v source. Ideal for cabinet start button.
Any left? Need 4.
-
Sure. A couple are pending but I should have four available. Let me know where abouts you are and I will get a shipping price for you.
-
PM Sent
-
All LED Wiz's sold.
SSF2T poster sold.
Six Bulgin buttons sold, two remaining.
Still open to offers/trades.
-
Those cocktail feet are teh hawtness! :cheers:
-
Hey Franco, could you make me some stainless bezels for my panel? I need a 4 button (30mm Seimitsu) plus two individuals (24mm Seimitsu) Also a stainless dustwasher for a LS-32?
(http://i1134.photobucket.com/albums/m609/burgerkingdiamond/DSC00500.jpg)
I got the panel from LizardLick:
http://www.lizardlick.com/Lizard-Lick-Control-Panel-1L6B_p_116.html (http://www.lizardlick.com/Lizard-Lick-Control-Panel-1L6B_p_116.html)
I can take measurements if I need to. I don't know if they are in a standard spacing.
-
Hey buddy. I'm not currently working in the same department as I was before and so I don't really get any free machine time to do things anymore :(
If you like I can design a bezel for you and send you a DWG/DXF whatever so you could get it cut. I know there are a couple of members that have CNC water jets or lazers.
I think I may have a couple of stainless dustwashers left for the LS-32 with the shaft cover, I will have to dig them out.
-
Thanks, but I guess I'll just leave it alone for now. If you were able to machine them up then I would be interested, but I don't want to try and find someone else to do it for me. They just looked nice and if it was convenient I wasn't gonna pass it up. As for the dustwasher, it wouldn't be worth it to pay the shipping for such a small individual item...
BTW, I got DDP DFK, I haven't tried it out yet, because I just got my new panel wired up late last night. I'll be jumping in very soon.