Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: reptileink on August 28, 2010, 12:04:02 pm

Title: Is this bezel "trimmable?" and diamond plate question
Post by: reptileink on August 28, 2010, 12:04:02 pm

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=120341471324&rvr_id=131139203927&crlp=1_263602_263622&UA=WXF%3F&GUID=8ea39fe81290a02652b1b4e1ff3d1290&itemid=120341471324&ff4=263602_263622 (http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=120341471324&rvr_id=131139203927&crlp=1_263602_263622&UA=WXF%3F&GUID=8ea39fe81290a02652b1b4e1ff3d1290&itemid=120341471324&ff4=263602_263622)

Need to grab a prefab because I suck at cutting squares out of foamboard(at least that's what the three sheets tell me..lol)
My cab is only 24" inside width. I think the height is good. TV is a 19" though......sorry, I suck at math...lol


On a side note, how can I cut a piece of diamond plate?  I ordered it too big and need to only shave off like 1/4 inch. I have a dremel, no table saw, and a chop saw. Should I grab a metal cutting blade???

Title: Re: Is this bezel "trimmable?" and diamond plate question
Post by: jimmy2x2x on August 28, 2010, 12:08:03 pm

The bezel in the auction gives you measurements, what are your measurements?

I have a feeling that the inside measurements given will be much too large for your monitor size.