The NEW Build Your Own Arcade Controls

Arcade Collecting => Restorations & repair => Topic started by: Solstar on August 13, 2010, 07:07:15 am

Title: Help with a mace:the dark age board
Post by: Solstar on August 13, 2010, 07:07:15 am

hi all,i have a mace dark age cabinet,but whenever i try to turn it on,nothing appears on screen,nor audio can be heard.i checked the board,and the leds together with the reference manual,and it appears that 3 leds that are near the processor,that are suppsoed to be turned on just for few seconds,than going off or blinking(according to the manual),are on,and again,according to the manual,it means they're in "processor reset" state,which i don't know what it means,nor the manual says what to do in case.any help?

Title: Re: Help with a mace:the dark age board
Post by: Q*Bert_OP on August 14, 2010, 12:42:06 am

Check your voltages first. Midway games need 5.1vdc - 5.25vdc on the 5 volt line or strange things can happen, including failure to boot and or game crashes/resets.