Build Your Own Arcade Controls Forum
Main => Reviews => Topic started by: atarimuseum on July 31, 2010, 11:36:51 pm
-
Hi,
Someone suggested I post over here and get a little feedback, I have a new controller I'm going to release in two weeks, but I'd like to just finalize a few things and get some feedback from anyone who's used various interface boards and such...
This is the Arcades32 interface:
2 player joystick inputs (4 way controllers on each side, mapped as an HID game controller)
6 standard buttons per player + plus 1 extra (also mapped as an HID game controller buttons)
Player 1 and Player 2 start buttons (mapped as HID keyboard keys 1 and 2)
Coin credit on each player (mapped as HID keyboard key 5)
2 Grounds on each player side
1 5vdc+ on each player side (for light up joysticks and other accessories)
Trackball -or- 2 spinner controls (mapped as a HID mouse device X/Y)
2 versions:
Basic with solder points ($32.99)
Deluxe with screw terminals ($39.99)
Now on the 7th buttons on each player side, let me ask everyone this:
1. would you prefer they be kept as game controller buttons like the other 6?
-or-
2. Have them mapped an HID keyboard keys like (ESC) one player 1 side and perhaps (TAB) on Player 2 side?
I'd like to hear everyone input before I finalize the firmware on them.
I expect to start selling these Mid-August.
Thanks,
Curt
-
Need more inputs.
-
I would add the spinner as second mouse X channel. That way you can handle most analog controls with one pad.
Does it have mouse buttons?
Can you remap buttons?
Does it have shift?
I would either make it a budget solution under 25 $ (it looks as complicated as an Arduino, and they sell under 25$ pre soldered), or make it a serious alternative to the MiniPac Opti (still with a lower price as you are new on the market).
-
Oh, and do the Ryan-Air trick with shipping if 25$ is too low. Maybe you can send it in a bubble evelope through the world for 2-3$, yet you charge 10$ worldwide shipping.
With Ryan-Air you pay 10$ for creditcard use, per person, so 5 tickets in one buy is 50$ credit-card fee :cheers:
-
Great info and feedback, thanks --- let me go back and have a look at adding more features. I was looking last night and yes I could implement a function shift and give the inputs all additional functionality....
I think I could redo the inputs into a matrix and expand the inputs for 4 players/6 buttons per player. I don't think I would be able to add a spinner AND trackball side by side in this design....
Thanks everyone!
Curt
-
Also, maybe I missed something here, but coin credit for player 2 is keyboard number 6, for mame default anyway. Player 1 credit is number 5.
-
Still can't quite gather if this is programmable or not. Sterling work on asking the community for input, but if it's not programmable then I think it would need to be significantly cheaper than established and feature-loaded encoders like the I-PAC family and GP-WIZ to warrant a purchase, particularly given the support offered with these existing products.
-
Still can't quite gather if this is programmable or not. Sterling work on asking the community for input, but if it's not programmable then I think it would need to be significantly cheaper than established and feature-loaded encoders like the I-PAC family and GP-WIZ to warrant a purchase, particularly given the support offered with these existing products.
I completely agree with this statement, while personally providing nothing new of value, myself.
Ok, so here's my thing. (I lied - here's something of value.) If it's comparable to a IPAC/GPWiz/Keywiz that's great. It's certainly in the ballpark. What I note is that, for the 'deluxe' model with what looks like a bit less configurability (is it configurable via software - if so, we need to know) than a KeyWiz/GPWiz, yet costs a dollar more.
Your thoughts?
-
I'm still a newbie here working on my first controller... but I'd think that 6 buttons per player is fine, 1P/2P start and use the other two for coin, pause, escape... if those are options.
The controller I bought has double row headers and came with wire and connectors (although I doubt everything will reach when I'm done making the box), so using headers and including header connectors might be an option too.
Unrelated to the actual question... I wanted to ask if the board has mounting holes? Sorry, I'm in QC/Assembly...
-
mid-august came and went... what happenned?
-
I think he realized he has more work to do =)