Build Your Own Arcade Controls Forum

Main => Buy/Sell/Trade - non-retail => Topic started by: mixelplick on July 22, 2010, 03:02:33 pm

Title: I suck at wiring LED lights! Will pay to have it done!!!
Post by: mixelplick on July 22, 2010, 03:02:33 pm

I realize that I am in over my head when it comes to wiring up my control panel with lights.  :badmood: I just suck at it. Know it's not something I am comfortable doing without smashing it all with a hammer after an hour, so in order to save my control panel and my parts I thought I would check on here to see if I could pay someone to do it for me.

I have an old slickstick CO2 control panel.
I have the all the transparent pushbuttons needed to replace the buttons. *you can even keep all the ones you pull out
I have the LED's and resistors needed.
I have an LED Wiz 32

I don't have the wiring or the patience anymore.

So my question is would someone be willing to do the lights for me and if so what would you charge? I live in Northern CA (Santa Clara) so anyone in that area would be best since I could drop all the stuff off but at this point it doesn't matter that much to me.

Thanks for looking,

Mike

Title: Re: I suck at wiring LED lights! Will pay to have it done!!!
Post by: Ginsu Victim on July 22, 2010, 04:48:04 pm

If you don't want a bunch of spam, I'd take that email address off that post. Google picks up these posts like crazy.

Title: Re: I suck at wiring LED lights! Will pay to have it done!!!
Post by: mixelplick on July 22, 2010, 06:20:49 pm

Thanks for the tip!

Title: Re: I suck at wiring LED lights! Will pay to have it done!!!
Post by: Jasonmm on July 23, 2010, 09:50:25 am

I would pay someone also ...
 (48446)

Jason

Title: Re: I suck at wiring LED lights! Will pay to have it done!!!
Post by: kronic24601 on July 23, 2010, 12:48:17 pm

In my experience (1 done, working on a 2nd now), the time it takes to solder/do all the wiring for this would end up being somewhat costly, unless someone wants to work for super cheap.

you may be better off selling the buttons you have and buying pre-made items from either Andy (ultimarc) or Randy (GrooveyGameGear) ... it may actually be LESS costly.