Build Your Own Arcade Controls Forum

Main => Audio/Jukebox/MP3 Forum => Topic started by: aircm on July 21, 2010, 10:02:10 am

Title: rowe r83 no sound on left channel ds1 broken what sort of globe can be used
Post by: aircm on July 21, 2010, 10:02:10 am

Hey Guys, I was playing with my juke box and when switching from mono to stereo i noticed very little deference i have only had it a week and thought is sounded a bit odd, I came to realise that the left channel is not working. After further investigation on the amplifier i found a little lamp ds1 broken off the board near the volume control. There is also a ds2 which is still attached, there is no mention of this in the parts list i have does anybody know what this parts is and if that can cause this issue, it is near where the volume control plugs in.

Title: Re: rowe r83 no sound on left channel ds1 broken what sort of globe can be used
Post by: aircm on July 22, 2010, 04:52:35 am

I have it sorted, apparently on later models they used a 270ohm 1/4watt resistor instead