Build Your Own Arcade Controls Forum

Main => Project Announcements => Topic started by: roberts123 on July 21, 2010, 08:42:25 am

Title: Trackball wiring?
Post by: roberts123 on July 21, 2010, 08:42:25 am

Hello,
        It has been awhile since i have posted anything on here, but i have a question on the wiring of my trackball. I have done this once before and i forget how i was able to slove my problem. The proble is trying to wire a trackball without a harness and i have striped all the wires and i know red is 5v and black and green are ground but i need to know what 2 wires are for the x-axis and y-axis. The colors of the four unknow wires and blue, green, yellow, and brown. Thank you for any help.

Title: Re: Trackball wiring?
Post by: BobA on July 21, 2010, 08:52:08 am

Molex Connector Wiring

 

(blk)        Gnd         1              4              Vdir         (green)

(red)        +5V         2              5              Hclk        (blue)

(yellow)  Vclk        3              6              Hdir        (brn)