Build Your Own Arcade Controls Forum
Main => Monitor/Video Forum => Topic started by: RVZ on July 19, 2010, 03:47:32 am
-
I'm using the s-video out from my Geforce 6600LE to the component input on my tv. I'm getting a horizontal line going from the bottom to the top on some games. For example with Wonderboy it's very noticeable. Is this a refresh rate issue?
-
if its a close pair of scrolling horizontal bars , it "could" be due to a ground loop issue.
what is the make/model of tv ?
-
if its a close pair of scrolling horizontal bars , it "could" be due to a ground loop issue.
what is the make/model of tv ?
It's a LG 29FS4RLX. It's just one line, looks like it's only doing it with side-scrolling games.
-
Is the line blurry and grayish/black or is it just a discontinuity in the image?
The former is possibly a ground issue. The latter means you need to enable wait for vsync in your video drivers or emulator as you are getting "tearing".
-
Is the line blurry and grayish/black or is it just a discontinuity in the image?
The former is possibly a ground issue. The latter means you need to enable wait for vsync in your video drivers or emulator as you are getting "tearing".
That's the word I was looking for... tearing! I'll check for those settings, thanks. :)
-
I couldn't find the place in Mame where to change those settings, so I enabled "wait for vsync" and "tripple buffering" in the Nvidia Control Panel. Fixed the problem with the tearing, thanks. :applaud:
BTW, how do you change these settings in Mame?