Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Darren01274 on July 12, 2010, 06:21:42 pm

Title: Speakers
Post by: Darren01274 on July 12, 2010, 06:21:42 pm

From Jamma connector wires do you connect the two wires to the two connectors on the arcade speaker?. I am still getting buzzing changed speaker for new one and also changed to AT Power supply.

Title: Re: Speakers
Post by: Bender on July 12, 2010, 06:29:23 pm

how bad is the buzz?
These boards have notoriously crappy sound

Title: Re: Speakers
Post by: CheffoJeffo on July 12, 2010, 07:36:10 pm

Try disconnecting your coin door and marquee lights.

Is there a ground wire attached to the frame of the speaker.

Title: Re: Speakers
Post by: Darren01274 on July 13, 2010, 01:45:53 am

Hi there is no problems when using PC speakers through the Line Out sounds fine. When I use Arcade Speaker with Jamma wires I get a bad hum/buzz with game sounds. I tried connecting ground wire to metal of speaker no joy really. Am I wiring it up right? 2 wires to two of the solder points on speaker.

Title: Re: Speakers
Post by: BobA on July 13, 2010, 03:19:23 pm

That is the only way to wire a single speaker.

Title: Re: Speakers
Post by: Bender on July 13, 2010, 10:46:47 pm

hey, have you tried a different speaker, maybe it's the speaker and NOT the jamma board? :dunno