Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: xrodney on June 02, 2010, 03:27:03 am

Title: Hantarex Monitors
Post by: xrodney on June 02, 2010, 03:27:03 am

Hi

does some one knows which models are these hantarex monitors?

CIN 25" A59 EAK 552X11
CIN 25" A59 EAK 552X44
CIN 28 16/9 W66ERF 142x44/17
CIN 34" A80 AEJ 15X99 - 15X0
CIN 34" M80 EPE 14X122
CIN 29" A68 EES 038X322/678
CIN 29" A68 ERF 142x044/M T.
CIN 28" A66 EAK 552X11
CIN 25" A59 EGD 048X 322

regards

Rodney

Title: Re: Hantarex Monitors
Post by: lilshawn on June 02, 2010, 11:52:42 am

these appear to be tube numbers not model numbers.

try again. there should be another label on the actual electronics portion that will provide more info.

Title: Re: Hantarex Monitors
Post by: apfelanni on June 02, 2010, 04:00:56 pm

philips a59 and a66eak071x44 are taken for the polostar multisyncs. they are also used for 100 hertz tvs ( x44 ) deflection unit . x01 and x11 are lowres polostars with philips tubes.

Title: Re: Hantarex Monitors
Post by: xrodney on June 03, 2010, 01:10:03 am

Which are the best in your opinion?  i found these monitors and I want to buy 1 or 2

Rodney

Title: Re: Hantarex Monitors
Post by: apfelanni on June 03, 2010, 04:51:20 am

2 be honest , i wouldnt buy any of it unless its a bargain . the newer multisync polostar have crappy chassis . they usually die after a few years , maybe 3/4 within 5 years. the older ones are ok , but nowadays u can achieve the same pic quality witch a 10 euro rgb tv . the philips tubes in hanta and tvs are 100 % identical. the only benefit would be the multisync feature, which is overrated in my opinion.  i got nearly 1o cabs and not a single with multi or trisync and i dont miss it.

Title: Re: Hantarex Monitors
Post by: xrodney on June 04, 2010, 04:09:00 am

can, can you give some feedback on


MTC28EV/3 can be used for VGA/SVGA input
piece MTC 28 EQ/3 for all 15kHz signals

regards

Rodney