Build Your Own Arcade Controls Forum
Main => Monitor/Video Forum => Topic started by: DynamiteSJ on May 29, 2010, 02:40:28 am
-
Hello guys..
My monitor was working properly.... till i accidently stepped on the remote board before i fit it into my cab.
I broke the V-POSI pot (RV204)... anyone know where i can buy it? I had no luck with searching myself
Thanks
-
what numbers are written on the pot?
-
I just see "13" on it... below where the knob was
-
normally its 3 numbers like 103-maybe its a 1k pot(13=1000)
-
Bob Roberts sells trimpots for monitor remote boards.
-
nope there is only 2 numbers on the pot... like h-posi, h-hold, contrast, and h-size is #14... bright #23, v-size #25, v-hold #53
-
Granspain is right 13 means 1000 Ohms or 1k. The first number is the value and the second is the number of zeros. More often they use another denomination using 3 digits like for example 203= 20x10^3=20 000 Ohms or 20KOhm.
-
awesome... thx