Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: jtslade on May 25, 2010, 07:45:54 am
-
I could use some help tracking down where to get another coin mech and housing to match the one in my MVS Neo Geo.
Any help would be appreciated.
(http://farm4.static.flickr.com/3283/3058488157_0bf50f9768_b.jpg)
(http://farm5.static.flickr.com/4013/4638782754_5ef22d171f_b.jpg)
(http://farm4.static.flickr.com/3378/4638793698_103b64caec_b.jpg)
(http://farm5.static.flickr.com/4004/4638194097_bc1fcbf9a2_b.jpg)
Let me know if you need more pics or info....
Danke..
-
So the German happ distributor did not know the mech.
I'll contact the US happ and see if they have an idea
-
Looks like a standard plastic coin mech to me. THe housing is what's different.
-
Found this at Happ, finally.
http://na.suzohapp.com/all_catalogs/coin_doors/42-7338-00 (http://na.suzohapp.com/all_catalogs/coin_doors/42-7338-00)
(http://na.suzohapp.com/images/42/42-7338-00_V1.jpg)
-
Searching for the right Coin Switch to use and then what kind of screws to get at the HW store.
-
Looks like this is the one and bend the wire at the right spot..
Cherry White Dot Trip Switch with Wire
Part # 42-0131-00 Mfg # E51-60B
http://na.suzohapp.com/amusement_products/electrical_supplies/42-0131-00?SS=ON (http://na.suzohapp.com/amusement_products/electrical_supplies/42-0131-00?SS=ON)
(http://na.suzohapp.com/images/40/42013100_lrg.jpg)
-
Looks like this is the one and bend the wire at the right spot..
Cherry White Dot Trip Switch with Wire
Part # 42-0131-00 Mfg # E51-60B
http://na.suzohapp.com/amusement_products/electrical_supplies/42-0131-00?SS=ON (http://na.suzohapp.com/amusement_products/electrical_supplies/42-0131-00?SS=ON)
The mech holder assembly (http://na.suzohapp.com/all_catalogs/coin_doors/42-7338-00) page you linked earlier says Uses coin switch 42-0394-00
Are you sure you aren't looking for this one (http://na.suzohapp.com/all_catalogs/electrical_supplies/42-0394-00)? :dunno
(http://na.suzohapp.com/images/40/42039400.jpg)
Scott
-
You are problay right, I was looking to have the terminals connect at the bottom. But what it was designed for is probably better.