Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: andrewbean90 on May 06, 2010, 12:20:57 pm

Title: has anybody... I need help
Post by: andrewbean90 on May 06, 2010, 12:20:57 pm

has anybody wired a momentary switch to an aimtrak

Title: Re: has anybody... I need help
Post by: BobA on May 06, 2010, 12:25:14 pm

Sure wire the switch from the 4 pin connector from common to AUX or common to trigger.   If you want any of the other points you will have to solder to p1 to p5 and connect to the common.

Title: Re: has anybody... I need help
Post by: andrewbean90 on May 06, 2010, 01:02:03 pm

theres 2 prongs whicch one is ground and which one is aux/ the button connection

Title: Re: has anybody... I need help
Post by: Ginsu Victim on May 06, 2010, 01:11:18 pm

Either.