Build Your Own Arcade Controls Forum
Main => Monitor/Video Forum => Topic started by: tinsley on May 03, 2010, 08:39:20 pm
-
I have a k7000 that will not power up. it is getting power to it, just no neck glow or anything. i want to do a cap kit and replace the flyback on it. what else should i replace? On Bob Roberts site, is the the"K7000 Flyback Repair Kit" the same as the "K7000 Flyback & Cap Kit" with additional parts? Any help is appreciated. This will be my 1st cap kit and want to get everything I need for it so I can do it all at once...
-
you probably already read this already, right ?
http://www.therealbobroberts.net/dead.html (http://www.therealbobroberts.net/dead.html)
how did you determined that the flyback was dead? I'm pretty new to this so I'm interested to know :)
anyways, looks like the "K7000 Flyback Repair Kit" include more items then the "K7000 Flyback & Cap Kit", which is just the cap kit and flyback.
(http://www.therealbobroberts.net/k7000.jpg)
Just email Bob.
I did my 1st cap kit a few months ago, I also got a main filter cap to fix wobbliness, it's cheap so you might as well replace it.
good luck
-
sorry am a dummy who is bob?
am interested
-
Sorry, I am a dummy. Who is Bob?
I am interested.
Bob Roberts, arcade parts supplier:
http://homearcade.org/BBBB/index.html (http://homearcade.org/BBBB/index.html)
-
ohhh the real bob roberts
-
how did you determined that the flyback was dead? I'm pretty new to this so I'm interested to know :)
any K7000 should have the flyback replaced.
they are all going bad on theses chassis and have a high failure rate like the G07.
if you having trouble getting it going i can fix it for you if needed.
Peace
Buffett