Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: ninjazx7 on July 30, 2003, 04:29:26 pm
-
:-\
Hi Guys,
I haven't been here in a while, but I built a Jamma machine to play Golden Tee 99 and Mortal Kombat 3 Ultimate.
Anyhow, I currently have a 27" tv hooked up that I use for the display. I found a converter to go from RGB --> NTSC and it works ok. Here's the dilema that I need some help with....
The company I work for is moving buildings and they don't have room for a Sony RVP-6010. This thing is a 60 inch widescreen projection monitor that you hook your computer up to. It has a scratch on the screen, but works just fine. It has inputs for R, G/G SYNC, B, SYNC/HD, and VD, plus a ton of other hookups.
Does anyone have any experience with these projectors? Anybody know if I'd be able to hook a JAMMA harness up to this beast?
Thanks alot,
Matt
-
ok... I have no clue whether you can hook it up or not...
but my suggestion is.... ;D ;D bring it home if you can...
haa ahaaa haa.... and then take your time to hack it so that it works....
if not, the arcadevga card from Ultimarc should be of help....
-
always take the 60 inch screen if its offered to you. Worry about how you can use it after
-
This thing is a 60 inch widescreen projection monitor that you hook your computer up to.
I think everyone here can agree that you are now obligated to make a showcase mamecab.
(or, where is this 60" screen and is it up for grabs... ;D)