Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: sunnywala on March 24, 2010, 05:20:17 pm

Title: help with identifying monitor
Post by: sunnywala on March 24, 2010, 05:20:17 pm

Hey guys,
I checked the link to identify monitors, but could not tell if mine is there

The cabinet is a old midway NBA Jam cabinet (92-95 era)

took a couple of pics for the experts
I found the sticker laying at the bottom of the cabinet...

also I just realized I might have to solder these connections to a monitor cable...
is there an easier way to hook this up to a arcadeVGA card without the jpac?

Title: Re: help with identifying monitor
Post by: SirPeale on March 24, 2010, 09:13:36 pm

You do indeed have a 25K7197, otherwise known as a K7000.

Title: Re: help with identifying monitor
Post by: sunnywala on March 25, 2010, 09:27:26 am

Hey Thanks!

Do you happen to know where the plug pinouts for this monitor are?
Ultimarc says all that is needed is Red Green Blue Hsync Vsync GND

Title: Re: help with identifying monitor
Post by: Ken Layton on March 25, 2010, 11:34:19 am

http://homearcade.org/BBBB/7000.html (http://homearcade.org/BBBB/7000.html)

http://jstookey.com/arcade/WG_25k7191/ (http://jstookey.com/arcade/WG_25k7191/)

The pinout is shown on a paper label glued to the bottom of the chassis pan. Also that label is posted at jstookey's site above.

Title: Re: help with identifying monitor
Post by: sunnywala on March 25, 2010, 01:00:21 pm

Thanks guys
Cant wait to get this thing up and running!