The NEW Build Your Own Arcade Controls

Main => Buy/Sell/Trade - non-retail => Topic started by: LOKIOLR on March 10, 2010, 06:34:54 pm

Title: FS: Leftover PC and Arcade Parts from my Mame builds (Folsom, CA, USA)
Post by: LOKIOLR on March 10, 2010, 06:34:54 pm

ASUS EAH4350 Radeon HD 4350 512MB 64-bit DDR2 PCI Express 2.0 x16
http://www.newegg.com/Product/Product.aspx?Item=N82E16814121310
 (http://www.newegg.com/Product/Product.aspx?Item=N82E16814121310)
Works great with Soft 15khz and over clocks pretty easily. Ran SF4 at pretty decent settings (all high except character model and particles, which looked great on my arcade monitor) - $22 shipped



ZOTAC ZT-84MEH3P-FSL GeForce 8400 GS 512MB 64-bit GDDR2 PCI Express x16
http://www.newegg.com/Product/Product.aspx?Item=N82E16814500121 (http://www.newegg.com/Product/Product.aspx?Item=N82E16814500121)

Never been used. Ended up going with a different card for my bartop. - $22 shipped

Over/Under Coin Door Single
http://www.happcontrols.com/coindoors/40051200.htm (http://www.happcontrols.com/coindoors/40051200.htm) (I believe this is the same model.)
(http://img251.imageshack.us/img251/738/dsc01120n.jpg)
I had this in a large mame cabinet that pretty much went unused. - $30 shipped

Patriot Single stick of DDR2 800 2GB ram - $20 shipped

All best offers will be considered as well

Title: Re: FS: Leftover PC and Arcade Parts from my Mame builds (Folsom, CA, USA)
Post by: LOKIOLR on March 15, 2010, 12:04:53 pm

Prices lowered and bump

Title: Re: FS: Leftover PC and Arcade Parts from my Mame builds (Folsom, CA, USA)
Post by: AlexC on March 15, 2010, 06:17:38 pm

PM sent on the joystick

Title: Re: FS: Leftover PC and Arcade Parts from my Mame builds (Folsom, CA, USA)
Post by: LOKIOLR on March 22, 2010, 07:11:38 pm

bump