Build Your Own Arcade Controls Forum

Main => Buy/Sell/Trade - non-retail => Topic started by: eccs19 on February 20, 2010, 03:27:09 pm

Title: Nintendo Decals
Post by: eccs19 on February 20, 2010, 03:27:09 pm

Just for fun, I cut a couple of these out.  Anyone interested in these?  I was thinking $15 shipped for a pair of them.  They are 18" across.  If you don't want black, I've got lots of other colors.  Just ask.

(http://i310.photobucket.com/albums/kk435/eccs19/IMGP4470.jpg)

Title: Re: Nintendo Decals
Post by: HaRuMaN on February 22, 2010, 11:08:28 am

Interesting.  Can you cut other stuff as well?  What's your max size?  (Length X Width)

Title: Re: Nintendo Decals
Post by: eccs19 on February 22, 2010, 12:47:40 pm

As long as I've got a vector file, I can cut it.  Maximum width I can cut is approx 20".  Length generally is not an issue.  I've cut stuff as long as 30'. Mostly dependent on the size of the roll of material I'm using. I wish my cutter was a little wider, then I could cut out my own paint mask for the side of my Pacman machine.