Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: rcoonjr on February 03, 2010, 04:47:28 pm

Title: Wells gardner k7302
Post by: rcoonjr on February 03, 2010, 04:47:28 pm

Wow I'm glad to be a part of this forum.  I see and work on alot of monitors every week.  Some I get stucks on and I feel I can bounce my problems off other experts.  

I got high voltage but no glow on the neck.. Any advice on where to check.  I also have a bestech like this too..
And I don't see much information about them.

Title: Re: Wells gardner k7302
Post by: lilshawn on February 03, 2010, 05:42:59 pm

check for voltage on the neck board going to the heater. if there is voltage, i'd suspect the tube is toast.

sometimes it can take a while before the heater gets hot enough, i'd give it a few to see if it warms up.

Title: Re: Wells gardner k7302
Post by: Ken Layton on February 03, 2010, 05:49:01 pm

See my repair guide to the 7300 series here:

http://home.comcast.net/~mtpacifico/_kenskorner/files/Wells-Gardner_K7300_series_repair.pdf (http://home.comcast.net/~mtpacifico/_kenskorner/files/Wells-Gardner_K7300_series_repair.pdf)