The NEW Build Your Own Arcade Controls
Software Support => GroovyMAME => Topic started by: Cucurbitacée on April 10, 2018, 02:18:00 pm
-
Hi,
I couldn't find any answer for this specific topic, so I'll ask directly. In my quest to fix my supersonic fast 2018 install (http://forum.arcadecontrols.com/index.php/topic,130667.msg1649528.html#msg1649528 (http://forum.arcadecontrols.com/index.php/topic,130667.msg1649528.html#msg1649528)) I used another graphic card. But as the new one is working on VGA-0 instead of DVI-1 and I don't get any picture.
I edited /etc/X11/xorg.conf and changed the value, but it doesn't work. Which I guess makes sense, X11 is not running a start. Anyway, can someone tell me how I can change the active port?
Thanks
-
Hi,
I reply to myself as I found the answer after a long grep on the whole drive. I'll put the answer here in case someone else stumble on this in the future. You need to edit
/boot/syslinux/syslinux.cfg
I don't know why but I couldn't see this file (or the content of the whole /boot folder for that matter) with the LiveCD, I had to swap the monitor with an LCD one.
Anyway, case closed for this one. ;D
-
Hi
For xorg you need select again a monitro from menú vídeo monitor.
For boot in the menú vídeo boot options
-
Basically, redo your video configuration from gasetup.