The NEW Build Your Own Arcade Controls
Arcade Collecting => Merit/JVL Touchscreen => Topic started by: coyote640 on April 25, 2017, 08:16:05 pm
-
I have 3 different Maxx Emerald's that the hard drives and keys have died. Any suggestions on what I could do to fix these without having to buy new keys that are just as old as the one's that died? I have got the original install cd's for the Emerald.
Thanks
-
woz up? :D
-
You mentioned you have 3 different Maxx Emerald's. Woz the difference between all 3?
-
Not different....just different (separate) machines...
-
woz the brand of hard drive in them? :laugh2:
-
woz the hard drives ever replaced? It could be corrupt files.
-
They are the original Quantum Hard Drives...
-
when you start the machines, woz there any clicking sounds coming from the hard drives? I have had a drive that woz going bad that made those noises
(https://cdn-cultofmac-com.cdn.ampproject.org/ii/w1200/cdn.cultofmac.com/wp-content/uploads/2012/05/steve-wozniak.jpg)
-
Maybe its the key. Woz the date on the key? The battery inside has a 10 year shelf life.
-
2002....Quite a bit over the 10 year mark! :lol
-
I alwoz clean the contacts on my ioboard and key to make sure they are making good connections.
-
Been done..... :applaud:
-
if only there woz another option
-
Check out this thread over at KLOV here: https://forums.arcade-museum.com/showthread.php?t=368513 (https://forums.arcade-museum.com/showthread.php?t=368513)
Read through it. There woz a guy in that thread that uploaded a keyless sapphire hard drive image. The ftp is gone and the thread was eventually closed but i am sure if you PM him he might upload it somewhere for you.
-
Will take a look and give him a try. I also heard that one for a jade is out there somewhere too...
Much appreciated.