The NEW Build Your Own Arcade Controls

Main => Project Announcements => Topic started by: Ryadel on August 20, 2018, 02:16:07 pm

Title: [Completed] Yet another Arcade Bartop Do-It-Yourself guide with RetroPie & Pi
Post by: Ryadel on August 20, 2018, 02:16:07 pm

I know I'm hardly the first one, but I think I made a good job explaining all the required stuff I used and how to actually perform the various tasks.

You can see the end result(s) here:

(https://i0.wp.com/www.hanahaki.com/wp-content/uploads/2018/06/arcade-bartop-raspberry-pi-retropie-mame-2018-diy-tutorial-guide.png)

The full tutorial is a 6-posts-long guide with more than 100 photos (!) of all the various building phases.

• Part 1 of 6: Introduction & Raw Materials (https://www.hanahaki.com/en/arcade-bartop-raspberry-pi-retropie-roms-bios-emu-emulator-how-to-make-diy-tutorial-guide-1-intro/)
• Part 2 of 6: Tools, Design & Prototype (https://www.hanahaki.com/en/arcade-bartop-raspberry-pi-retropie-roms-bios-emu-emulator-how-to-make-diy-tutorial-guide-2-tools-prototype/)
• Part 3 of 6: Building the Cabinet (https://www.hanahaki.com/en/arcade-bartop-raspberry-pi-retropie-roms-bios-emu-emulator-how-to-make-diy-tutorial-guide-3-cabinet-building/)
• Part 4 of 6: Painting & T-Molding (https://www.hanahaki.com/en/arcade-bartop-raspberry-pi-retropie-roms-bios-emu-emulator-how-to-make-diy-tutorial-guide-4-fond-painting-t-molding/)
• Part 5 of 6: Installing the Hardware (https://www.hanahaki.com/en/arcade-bartop-raspberry-pi-retropie-roms-bios-emu-emulator-how-to-make-diy-tutorial-guide-5-hardware/)
• Part 6 of 6: Configuring the Software (Raspberry PI & Retropie) (https://www.hanahaki.com/en/arcade-bartop-raspberry-pi-retropie-roms-bios-emu-emulator-how-to-make-diy-tutorial-guide-6-software-scraper/)

Let me know if you like it!

Title: Re: [Completed] Yet another Arcade Bartop Do-It-Yourself guide with RetroPie & Pi
Post by: MrThunderwing on August 21, 2018, 04:21:09 pm

Nice job on this mate! I enjoyed reading through the tutorial too - I thought it was nicely presented and well written.

Title: Re: [Completed] Yet another Arcade Bartop Do-It-Yourself guide with RetroPie & Pi
Post by: Ryadel on August 21, 2018, 09:01:02 pm

Quote from: MrThunderwing on August 21, 2018, 04:21:09 pm

Nice job on this mate! I enjoyed reading through the tutorial too - I thought it was nicely presented and well written.

Thanks :)

Title: Re: [Completed] Yet another Arcade Bartop Do-It-Yourself guide with RetroPie & Pi
Post by: firedance on August 22, 2018, 05:37:39 am

good job on both arcades, might have to go the pi route at some point  :applaud: