The NEW Build Your Own Arcade Controls
Arcade Collecting => Pinball => Topic started by: jackiabu on April 24, 2015, 03:12:15 pm
-
Hi
I decided that my next project will be a virtual pinball. This is something I wanted to do long ago. But I had no space in the room, until now.
Anyway I decided to go on a screen 40 inches (playfield) and for the backglas 23' wide screen....My question, is it better to put 19' (4:3) for the Backglas or stay whit the 23' wide screen?
Thanks for the help
(http://i.imgur.com/StvmSfK.jpg)
-
Virtual pinballs are a waste of time and money. Nobody likes them.
-
Virtual pinballs are a waste of time and money. Nobody likes them.
Speak for yourself...
-
i think 23' for the backglass is just fine ;D but it's depending what Size your plans to building the Pinball.
-
I have a 39" PF 23" BG and use a 15" for DMD. In a standard mid 70's Bally cab (FYI - that I salvaged from a barn that was stripped and rotting). Anyhow, a 23" fits almost perfectly width wise. I will also throw out my 2 cents for virtual pins, They can be fun to play and help you learn certain modes but if you plan to compete in league play, it could cause your timing/gameplay to be off. While VP10 should help in realism and physics it's just not the same.
-
I have a 39" PF 23" BG and use a 15" for DMD. In a standard mid 70's Bally cab (FYI - that I salvaged from a barn that was stripped and rotting). Anyhow, a 23" fits almost perfectly width wise. I will also throw out my 2 cents for virtual pins, They can be fun to play and help you learn certain modes but if you plan to compete in league play, it could cause your timing/gameplay to be off. While VP10 should help in realism and physics it's just not the same.
Thanks men :)
i dont think i will instal VP too much headache :dizzy: i already install Futre pinball and hyperpin for the fronted.
-
Neither looks quite right but if it is a 2 screen setup, I prefer 4:3 (or 5:4).
-
I highly recommend adding vp to your build along with all the toys for feedback, so much better :)
-
this topic has been moved to here : http://forum.arcadecontrols.com/index.php/topic,145542.0.html (http://forum.arcadecontrols.com/index.php/topic,145542.0.html) ;)
-
Impressive project! Best of luck to you! :)