The NEW Build Your Own Arcade Controls
Main => Monitor/Video Forum => Topic started by: jbserra on February 06, 2020, 11:17:01 am
-
I've seen some great troubleshooting on an old thread that I tried to follow for my situation, but it seems mine might be a little different.
My monitor went out the other day. Pulled the main board (Kortek MP-KT2182), plugged it in on the workbench and I get ticking. I found the Horiz Output Transistor and it's a 5 pin. VCC (+50V) and drain voltages are not steady. Outputs from the main transformer are also not steady. I don't have the tube or neck board connected, if that makes a difference.
Where should I go next in troubleshooting?
TIA!!
-
Any ideas or places to start? I'd like to get this buttoned back up!
Thanks!
-
There are some monitor guys who really know their stuff here.
If you can't get help here, try posting on KLOV.com
-
Might have some time next week to dig into this. Any help would be appreciated. Thanks in advance!