The NEW Build Your Own Arcade Controls
Main => Main Forum => Topic started by: Gatt on January 12, 2020, 08:38:13 pm
-
Hi all,
I started installing my J-Stick rotary upgrade today and ran in to a few problems. The biggest one being - after I installed the new shaft and spacer washers there's too much "slop" in the joystick. Feels like about a quarter inch of the shaft slides downwards when held flat and the actuator loses contact with the microswitches, almost as if the shaft is too long.
Has anyone installed a rotary kit on a J-Stick? Were there any issues with the actuator hitting the switches?