The NEW Build Your Own Arcade Controls

Arcade Collecting => Restorations & repair => Topic started by: Snowblindz on February 22, 2018, 12:56:14 am

Title: I'm wanting to restore my Konami Windy City I cabinet to it's former glory
Post by: Snowblindz on February 22, 2018, 12:56:14 am

Hello All,

First off I hope i'm posting this in the proper section of the board. I recently was able to get retrieve my Windy City I cabinet. Here is a list of things I need to get it back in order. I'm reaching out to all of you because this has always been the best place on the net, no matter how obscure, to find arcade parts. Below is a list of things I've found that I need for this cabinet.

1. 29" monitor is missing the chassis. Yoke appears to still be in tact. Monitor looked beautiful when it worked... one day the chassis went kaput and I was never able to afford to replace it. I sent it to a guy in Australia and never followed up on it.
2. Power supply... it appears to be dead.
3. A key to get into the coin door, control panel etc... I lost the key!
4. Topper
5. Replacement control panel - not really necessary but would be nice to have cleaner panel
6. Original side art
7. replacements for all the doors...they are discolored and bit rusty.
7. Sanwa joysticks & buttons


That's all I can think of right now but I'm sure on my journey to restoration, I will find a bunch of other things I need to fix/replace. I appreciate any and all help! Thanks!

Title: Re: I'm wanting to restore my Konami Windy City II cabinet to it's former glory
Post by: Ian on February 22, 2018, 10:09:34 pm

This site is a bit dead regarding restorations... Try over at Klov.