The NEW Build Your Own Arcade Controls

Main => Monitor/Video Forum => Topic started by: elcheapouno on February 05, 2018, 07:23:12 pm

Title: Wells-gardner chassis identification
Post by: elcheapouno on February 05, 2018, 07:23:12 pm
Hello everybody, new to The Forum.
I picked up a Wells Gardner frame with chassis, no monitor. The monitor frame has the wells-gardner model number and the serial number, but the serial number doesn't match the serial number on the chassis. Hoping somebody can Iidentify this chassis for me. If it's right, would it be a k7000 for a 25 inch monitor?
Title: Re: Wells-gardner chassis identification
Post by: Ken Layton on February 05, 2018, 10:41:36 pm
Your chassis is a 25K7191 (25" K7000 series).
Title: Re: Wells-gardner chassis identification
Post by: elcheapouno on February 06, 2018, 09:52:51 am
I was just worried that the chassis in the frame could possibly be mixed matched because the serial number on the chassis and frame don't match up. So the chassis by itself still looks like a k7000 chassis? And is there a way to identify if it's a 19 inch or 25 inch chassis by just looking at it?

I just know on my other monitor, the frame sticker and the chassis sticker serial number match one another. Thanks so much for the help
Title: Re: Wells-gardner chassis identification
Post by: behrmr on February 06, 2018, 11:00:09 am
Quote from: elcheapouno on February 06, 2018, 09:52:51 am
I was just worried that the chassis in the frame could possibly be mixed matched because the serial number on the chassis and frame don't match up. So the chassis by itself still looks like a k7000 chassis? And is there a way to identify if it's a 19 inch or 25 inch chassis by just looking at it?

I just know on my other monitor, the frame sticker and the chassis sticker serial number match one another. Thanks so much for the help

P538 silk screened on chassis = 25" K7000
Title: Re: Wells-gardner chassis identification
Post by: elcheapouno on February 06, 2018, 02:15:18 pm
ah, that great news! thatks guys!! :cheers:
Title: Re: Wells-gardner chassis identification
Post by: elcheapouno on February 06, 2018, 09:46:16 pm
Installed the chassis and got nothing and no neck glow. Check the fuse in that was intact. So I checked B+ at the ceramic resistor and it was high on both sides in the 200s. So after that I pulled one leg of the diode of d-10 and tried to Power It Up and still got nothing. What do you guys think? Also should I start a new thread for this? Thanks.