The NEW Build Your Own Arcade Controls

Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: TalkingHeadsFan on January 07, 2017, 10:36:07 pm

Title: Skeeball 2010 Ball Release not working
Post by: TalkingHeadsFan on January 07, 2017, 10:36:07 pm

Hi all,

I recently acquired a Skeeball 2010 game and I've been trying to get the ball release to work properly. I replaced the ball release solenoid and tested the resistance across the coil (~20 ohms) and it reads fine. I also just replaced the solid state relay and all it does is turn green for about 1 second when the game starts, then turns off with no action from the solenoid.

Here's a video I took of the problem. Any advice would be greatly appreciated...

https://youtu.be/9kI3GUkQM00

Thanks,
-Doug

Title: Re: Skeeball 2010 Ball Release not working
Post by: HighScoreBeagle on April 17, 2017, 02:56:36 am

Any luck with this?

I've looked everywhere trying to find more information on plans and schematics for building or fixing one of these things.