The NEW Build Your Own Arcade Controls
Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: TalkingHeadsFan on January 07, 2017, 10:36:07 pm
-
Hi all,
I recently acquired a Skeeball 2010 game and I've been trying to get the ball release to work properly. I replaced the ball release solenoid and tested the resistance across the coil (~20 ohms) and it reads fine. I also just replaced the solid state relay and all it does is turn green for about 1 second when the game starts, then turns off with no action from the solenoid.
Here's a video I took of the problem. Any advice would be greatly appreciated...
https://youtu.be/9kI3GUkQM00
Thanks,
-Doug
-
Any luck with this?
I've looked everywhere trying to find more information on plans and schematics for building or fixing one of these things.