The NEW Build Your Own Arcade Controls

Main => Audio/Jukebox/MP3 Forum => Topic started by: Ratfink4600 on July 29, 2018, 10:40:20 pm

Title: Ami model 91 error 30
Post by: Ratfink4600 on July 29, 2018, 10:40:20 pm

Unit powers up has error 30 then 32 later clear codes and comes up instantly after putting back to on....  Unit does not attempt to rotate

Title: Re: Ami model 91 error 30
Post by: Ken Layton on July 29, 2018, 11:38:51 pm

30 and 32 are magazine optical switch errors. Could be dirty/mis-adjusted/defective magazine optical switches. Or could be a problem with the Mechanism Control Board.

Title: Re: Ami model 91 error 30
Post by: ami-man on August 03, 2018, 07:35:39 am

Ken's take on the error codes are correct, I would check that the transfer motor and the cam switches are not shorting out on the uninsulated spade connections.

Regards
Alan

Alan Hood
ami-man
UK