The NEW Build Your Own Arcade Controls

Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: BobA on April 19, 2011, 04:11:39 pm

Title: Elo glass touchscreen mounting info
Post by: BobA on April 19, 2011, 04:11:39 pm

There are always questions about the Elo touchscreen mounting (glass to CRT or LCD) so when I found this document I figured it should be posted here.(intelli.pdf)  Also Elo 1545L manual (008521_f.pdf)

Title: Re: Elo glass touchscreen mounting info
Post by: BobA on May 02, 2011, 06:18:48 pm

I got the 3M very high strength tape at Home Depot.  It is labeled for outdoor usage.  The only problem I had was it is very wide so I used it on the LCD then cut the remaining off.  The straight side of the tape was used on the other side of the LCD and then the remainder cut off again.   This is the tape used to stick the touchscreen to the LCD not the bezel tape.

Title: Re: Elo glass touchscreen mounting info
Post by: NIVO on May 13, 2011, 11:03:03 pm

good info Bob, stickied.

Title: Re: Elo glass touchscreen mounting info
Post by: ed12 on July 02, 2012, 06:35:52 pm

thks boba

ed