The NEW Build Your Own Arcade Controls
Main => Monitor/Video Forum => Topic started by: patrick on May 10, 2002, 08:06:35 pm
-
I've looked everywhere...
Can anyone out there using an Eygo 27" Monitor give me the dimentions? Thanks!
-
If no one else answers before I do I will measure mine when I get home from work tonight and post the dimensions.
I had to take the steal frame off and use a saws-all to remove a small 1/2" lip to be able to slide it into my cabinate.
-
Sorry it took me so long. It is 25" wide by 19" high by 17" deep.
On the width there is about a 1/2" lip that runs out from the sides parrallel to the front on both the right and left side( I had to cut these off because I had already built the cabinet.
The depth and height are also a little difficult to measure since the metal frame that holds the glass and electronics holds the moniter at a slight angle.
I am very happy with mine. For the price it was awsome.