The NEW Build Your Own Arcade Controls
Main => Main Forum => Topic started by: Cray on July 02, 2002, 09:55:04 pm
-
Alright, so I'm making a cabinet, bought the MDF, and then realized, I don't have a surface to cut it on.
I'm thinking of making a cheap table out of a couple sawhorses and a bunch of 2x4's.
Anyone out there have a better idea?
-
Alright, so I'm making a cabinet, bought the MDF, and then realized, I don't have a surface to cut it on.
I'm thinking of making a cheap table out of a couple sawhorses and a bunch of 2x4's.
Anyone out there have a better idea?
This is all I used. For the larger pieces, I just used two sawhorses.
At times, a helping hand to keep pieces from crashing to the floor comes in handy.
Steve
-
my working surface was a couple of horses with an old door on them.
-
That would work great. Just make sure that the saw horeses and boards don't have and rough spot that would gouge your MDF.